(A) Product Overview 
 1, SJB-D60 manual pumps implementation of the standards: JB/ZQ4540-97. Nominal Pressure: 0.63MPa. 
 2, apply to 10MPa, 20MPa stress level of manual lubrication pumps or small electric lubrication pump inside the lubrication oil storage. 
 3, for medium penetration 310 ~ 385 (25 ℃, 150g) 1/10mm the grease (NLGI0 # ~ 1 #). 
 (B) action that 
 1, the operating handle down movement, the valve off the piston chamber volume becomes smaller, the grease along the transmission oil cooler hose to the reservoir, the piston lower volume gradually become larger, the formation of negative pressure, open the suction piece, the inhalation inside the grease barrel. When the handle upward movement, the piston chamber to form negative pressure suction on the valve opening piece off of the grease into the piston chamber. When the downward movement of the handle again, repeat the process. 
 (C) instructions for use 
 1, when the oil hose with one end of the export pumps, other end of the supply of oil storage device port; use the other end after the screw should be screwed to the pump to catch. 
 2, the use of grease must be clean, homogeneous, within the prescribed grades. 
 3, should always check the barrel of grease to prevent inhalation of air mixed with fat-free oil storage inside.